rf0101 3, rev . a ( 8/ 20 /13 ) ?201 3 microsemi corporatio n page 1 of 7 mp5ke5.0a C mp5ke170ca(e3) available 500 watt transient voltage suppressor (tvs) p rotection device screening in reference to mil - prf - 19500 available description this mp5ke 5.0 a C mp5ke170 ca is a famil y of economical 500 w transient voltage supppressors (tvs) for protecting voltage - sensitive components from destruction or degradation. it is available in both unidirectional and bi - directional configurations as well as rohs c ompliant (annealed matte - tin finish) and upscreened, enhanced high reliability options . the response time of their clamping time is virtually instantaneous. as a result, they may also be used effectively for protection from esd or eft per iec61000 -4- 2 and iec61000 -4- 4 or for inducti ve switching environments and induced rf i . they can also be used for protection from the secondary effects of lightning per iec61000 -4- 5 at the class levels listed below. do - 204al (do - 41 ) plastic package also available in : do - 214 ac package ( tabbed surface mount ) smaj5.0 C smaj 170a important: for the latest information, visit our website http://www.microsemi.com . feat ures ? available in both unidirectional and bidirectional configurations ? suppresses transients up to 500 watts peak pulse power ( p pp ) @ 10/1000 s ? 3 lot norm screening performed on standby current i d ? 100% surge tested devices ? various screening in reference to mil - prf - 19500 are available. refer to hirel non - hermetic product portfolio for more details on the screening options . (see part nomenclature for all options.) ? high reliability controlled devices have wafer fabricatio n and assembly lot traceability ? moisture classification is l evel 1 with no dry pack required per ipc/jedec j - std - 020b ? rohs compliant versions are available applications / benefits ? prot ects sensitive components such as ics, cmos, bipolar, bicmos, ecl, dtl, t 2 l, etc. ? selections fr om 5.0 to 17 0 volts stand - off voltage (v wm ) ? economical tvs series for thru - hole mounting ? sim ilar to sa5.0 thru sa170 series ? protection from switching transients & induced rf i ? sub- nanosecond response time (unidirectional) ? compliant to iec61 0 00 -4- 2 a n d iec6 1 000 -4- 4 for esd and eft protection respectively ? secondary lightning protection per iec61000 -4- 5 with 4 2 o hms source impedance : class 1 : m p5ke 5.0 a to mp5ke120a or ca class 2: mp5ke 5.0 a to mp5ke60a or ca class 3: mp5ke 5.0 a to mp5ke30a or ca class 4: mp5ke 5.0 a to mp5ke15a or ca ? secondary lightning protection per iec61000 -4- 5 with 1 2 o hms source impedance : class 1: m p5ke 5.0 a to mp5ke36 a or ca class 2: mp5ke 5.0 a to mp5ke18 a or ca msc C lawrence 6 lake street, lawrence, ma 01841 1- 800 - 446 - 1158 or (978) 620 - 2600 fax: (978) 689 - 0803 msc C ireland gort road business park, ennis, co. clare, ireland tel: +353 (0) 65 6840044 fax: +353 (0) 65 6822298 website: www.microsemi.com downloaded from: http:///
rf0101 3, rev . a ( 8/ 20 /13 ) ?201 3 microsemi corporatio n page 2 of 7 mp5ke5.0a C mp5ke170ca(e3) maximum ratings @ 25 oc unless otherwise noted parameters/test conditions symbol value unit junction and storage temperature t j and t stg - 65 to +150 o c thermal resistance, junction to lead @ 3/8 inch (10 mm) lead length from body r ? jl 45 o c/w thermal resistance, junction to ambient (1) r ? ja 105 o c/w peak pulse power dissipation (2) 10/1000 us p pp 500 w steady - state power dissipation @ t l = 25 oc 3/8 inch (10 mm) from body p d 2.77 1.19 (1) w forward voltage (3) v f 3.5 v sold er temperature @ 10 s 260 o c notes : 1. at t a = 25 oc w hen mounted on fr4 pc board with 4 mm 2 copper pads (1 oz) and track width 1 mm, length 25 mm . 2. with impulse repetition rate (duty factor) of 0.01 % or less (also figure 1 and 4). 3. at 3 0 am p peak impulse of 8.3 ms half - sine wave (unidirectional only). mechanical and packaging ? case: void- free transfer molded thermosetting epoxy body meeting ul94v - 0. ? terminals: rohs compliant annealed matte/tin over copper. solderable per mil - std - 750, method 2026. ? marking: body marked with part number. ? polarity: band denotes c athode. bidirectional not marked . ? tape & reel option: standard per eia - 296 (add tr suffix to part number). consult factory for quantities. ? weight: approximately 0. 3 grams. ? see p ackage d imensions on last page. part nomenclature m p5k e 5.0 c a (e3) reliability level * m ma mx mxl (*see hirel non - hermetic product portfolio ) point 5 kilowatt encapsulated rohs compliance e3 = rohs c ompliant blank = non - rohs c ompliant 5% tolerance polarity c = bi - directional blank = unidirectional working s tandoff voltage (see electrical characteristics table) downloaded from: http:///
rf0101 3, rev . a ( 8/ 20 /13 ) ?201 3 microsemi corporatio n page 3 of 7 mp5ke5.0a C mp5ke170ca(e3) symbols & definitions symbol definition v( br) temperature coefficient of breakdown voltage: the change in breakdown voltage divided by the change in temperature that caused it expressed in %/ c or mv/ c. v wm wo rking s tandoff v oltage: the maximum - rated value of dc or repetitive peak positive cathode - to - anode voltage that may be continuously applied over the standard operating temperature. p pp peak pulse power. the rated random recurring peak impulse power or rated nonrepetitive peak impulse power. the impulse power is the maximum - rated value of the product of i pp and v c . v ( br) breakdown voltage: the voltage across the device at a specified current i (br) in the breakdown region. i d standby current: the current through the device at rated stand - off voltage. i pp peak impulse current: the maximum rated random recurring peak impulse current or nonrepetiti ve peak impulse current that may be applied to a device. a random recurring or nonrepetitive transient current is usual ly due to an external cause, and it is assumed that its effect will have completely disappeared b efore the next transient arrives. v c clamping voltage: the voltage across the device in a region of low differential resistance during the application of an impulse current (i pp ) for a specified waveform. i (br) b reakdown current : the current used for measuring breakdown voltage v (br) . downloaded from: http:///
rf0101 3, rev . a ( 8/ 20 /13 ) ?201 3 microsemi corporatio n page 4 of 7 mp5ke5.0a C mp5ke170ca(e3) electrical characteristics @ 25 oc part number breakdown voltage v (br) min. max. test current i (br) rated standoff voltage v wm max standby current i d @ v wm max clamping voltage v c @ i pp max peak puls e current i pp max temp coefficiant of v (br ) v(br) v v ma v a v a % / c mp5ke 5.0a mp5ke 6.0a 6.4 6.67 7.0 7.37 10 10 5.0 6.0 600 600 9.2 10.3 54.3 48.5 0 .057 0 .059 mp5ke 6.5a mp5ke 7.0a 7.22 7.78 7.98 8.60 10 10 6.5 7.0 400 150 11.2 12.0 44.7 41.7 0 .061 0 .065 mp5ke 7.5a mp5ke 8.0a 8.33 8.89 9.21 9.83 1 1 7.5 8.0 50 25 12.9 13.6 38.8 36.7 0 .067 0 .070 mp5ke 8.5a mp5ke 9.0a 9.44 10.0 10.4 11.1 1 1 8.5 9.0 5 1 14.4 15.4 34.7 32.5 0 .073 0 .076 mp5ke 10a mp5ke 11a 11.1 12.2 12.3 13.5 1 1 10 11 1 1 17.0 18.2 2 9.4 27.4 0 .078 0 .081 mp5ke 12a mp5ke 13a 13.3 14.4 14.7 15.9 1 1 12 13 1 1 19.9 21.5 25.1 23.2 0 .082 0 .084 mp5ke 14a mp5ke 15a 15.6 16.7 17.2 18.5 1 1 14 15 1 1 23.2 24.4 21.5 20.6 0 .086 0 .087 mp5ke 16a mp5ke 17a 17.8 18.9 19.7 20.9 1 1 16 17 1 1 26.0 27.6 19 .2 18.1 0 .088 0 .090 mp5ke 18a mp5ke 20a 20.0 22.2 22.1 24.5 1 1 18 20 1 1 29.2 32.4 17.2 15.4 0 .092 0 .093 mp5ke 22a mp5ke 24a 24.4 26.7 26.9 29.5 1 1 22 24 1 1 35.5 38.9 14.1 12.8 0 .094 0 .096 mp5ke 26a mp5ke 28a 28.9 31.1 31.9 84.4 1 1 26 28 1 1 42.1 45.4 11. 9 11.0 0 .097 0 .098 mp5ke 30a mp5ke 33a 33.3 36.7 36.8 40.6 1 1 30 33 1 1 48.4 53.3 10.3 9.4 0 .099 0 .100 mp5ke 36a mp5ke 40a 40.0 44.4 44.2 49.1 1 1 36 40 1 1 58.1 64.5 8.6 7.8 0 .101 0 .101 mp5ke 43a mp5ke 45a 47.8 50.0 52.8 55.3 1 1 43 45 1 1 69.4 72.7 7.2 6.9 0 .102 0 .102 mp5ke 48a mp5ke 51a 53.3 56.7 58.9 62.7 1 1 48 51 1 1 77.4 82.4 6.5 6.1 0 .103 0 .103 mp5ke 54a mp5ke 58a 60.0 64.4 66.3 71.2 1 1 54 58 1 1 87.1 93.6 5.7 5.3 0 .104 0 .104 mp5ke 60a mp5ke 64a 66.7 71.1 73.7 78.6 1 1 60 64 1 1 96.8 103.0 5.2 4.9 0 .104 0 .105 mp5ke 70a mp5ke 75a 77.8 83.3 86.0 92.1 1 1 70 75 1 1 113.0 121.0 4.4 4.1 0 .105 0 .105 mp5ke 78a mp5ke 85a 86.7 94.4 95.8 104.0 1 1 78 85 1 1 126.0 137.0 4.0 3.6 0 .106 0 .106 mp5ke 90a mp5ke 100a 100.0 111.0 111.0 123.0 1 1 90 100 1 1 146.0 162.0 3.4 3.1 0 .107 0 .107 mp5ke 110a mp5ke 120a 122.0 133.0 135.0 147.0 1 1 110 120 1 1 177.0 193.0 2.8 2.0 0 .107 0 .107 mp5ke 130a mp5ke 150a 144.0 167.0 159.0 185.0 1 1 130 150 1 1 209.0 243.0 2.4 2.1 0 .108 0 .108 mp5ke 160a mp5ke 170a 178.0 189.0 197.0 209.0 1 1 160 170 1 1 259.0 275.0 1.9 1.8 0 .108 0 .108 note s: 1. forward voltage (v f ) @ 35 amps peak, 8.3 ms sine wave equal to 3.5 volts max. (excluding b idirectional) . 2. for b idirectional c onstruction, c apacitance will be one - half that shown in f igure 4 . downloaded from: http:///
rf0101 3, rev . a ( 8/ 20 /13 ) ?201 3 microsemi corporatio n page 5 of 7 mp5ke5.0a C mp5ke170ca(e3) graphs t d C pulse width ( s ec.) figure 1 peak pulse power rating curve t C time C ms test waveform parameters: tr=10 s, tp=1000 s figure 2 pulse waveform for 10/1000 exponential surge pulse current in percent of i pp p pp C peak pulse power ( kw) downloaded from: http:///
rf0101 3, rev . a ( 8/ 20 /13 ) ?201 3 microsemi corporatio n page 6 of 7 mp5ke5.0a C mp5ke170ca(e3) graphs (continued) lead or ambient temperature c figure 3 derating curve v (br) C breakdown voltage C volts figure 4 typical capacitance vs. breakdown voltage peak pulse power (p pp ) or continuous average power in percent of 25c c C capacitance C pico farads downloaded from: http:///
rf0101 3, rev . a ( 8/ 20 /13 ) ?201 3 microsemi corporatio n page 7 of 7 mp5ke5.0a C mp5ke170ca(e3) package dimensions notes: 1. dimensions are in inches. 2. millimeters are given for information only. 3. in accordance with asme y14.5m, diameters are equivalent to x symbology. dimensions ltr inch millimeters min max min max bd - 0.107 - 2.718 bl - 0.205 - 5.207 ld 0.030 0.034 0.762 0.864 ll 1.10 - 27.940 - downloaded from: http:///
|
